Product Care

The cleaning process is fairly simple and can be done at home either yourself or by a common house help. Find detailed (yet simple) instructions below. 

Things you’ll need:

-HCL/Bathroom cleaning acid

-Wide Cello tape (if not narrow is fine) 

-Cotton balls or Tissue (for packing the ends before taping)

-1L Water bottle 

• Take the1L bottle of water and remove roughly 100 ml from it

• Add that same amount of HCL/bathroom cleaner in the bottle.

• Let settle for 2 minutes. Bypass the water supply. 

• Block it from one end pour in the solution and Block it from the other end

• Let it settle in there for 15mins (max 20 mins) and wait for it to react with the impurities

• In maximum 20 mins drain out the solution 

• Pass pressured water through one side. Either under tap or by jet spray. 

If you notice closely at first there would be some sort of Impurities/sediments which would now be clear and surface will be clean. 

The conditioner is almost as good as new and ready to use again for another year or so!