Aqua Conditioners Water Softener Installation
Aqua Conditioners doesn’t just provide a long-term solution for your hard water problems but is also super quick and easy to install! To make the water softener installation process easier our units are designed with threads. This means all that your plumber has to do is attach some adapters to your exisitng pipe screw on the Aqua Conditioner and voila – its installed. Best of all they’re bi-directional products hence you don’t need to worry about the inflow or outflow!
Where to install the Aqua Conditioners Water Softener?
If you have a bore well-pumping water to sump and sump pumping water to the overhead tank then we would suggest, you install a unit at sump to the overhead tank. If you don’t have a sump, you install the unit between bore to the overhead tank.
You can install it either on the pump outlet or at the tank inlet, depending on the flow of water.
You can either install a unit in your main supplying water line to the whole house or have units installed to each bathroom and kitchen.
If you stay in an apartment, you can either install a unit in your main line that supplies water to the whole house or have units installed in bathrooms and kitchens, separately.
How to install the Aqua Conditioners Water Softener?
Individually, installing an Aqua Conditioner is quite simple. Your local plumber could install it using the following steps:
- Locate the position to install the Aqua Conditioner.
- Measure or mark the length of the Aqua Conditioner.
- Cut and remove the measured length from your existing pipeline.
- Insert and Install Aqua Conditioner.
- Get softer water, naturally.